1000℃小型台车炉是由洛阳格马高温电炉生产的小型高温台车式电阻炉，该1000℃台车炉具有节能、环保，外形美观、结构合理，操作简单方便特点。

The 1000 ℃ trolley furnace is a small high temperature trolley type resistance furnace produced by Luoyang Gema high temperature electric furnace. The 1000 ℃ trolley furnace has the characteristics of energy saving, environmental protection, beautiful appearance, reasonable structure, simple and convenient operation.

STR 1000℃台车炉外壳采用质冷轧钢板经精密数控机床加工而成，炉体底部与小车轻轨连为一体，用户不需要任何安装，放在平整的地面上即可使用。炉衬为全纤维结构，采用质陶瓷纤维毯为原料，相对于砖式炉膛节能40%左右。主要用于机械零部件的正火、退火、淬火用。作方便，可编程，PID自整定、自动升温、自动保温、 自动降温，无需值守;可另配与计算机通讯通过计算机操作电炉(启动电炉、停止电炉、暂停升温、设定升温曲线、升温曲线储存、历史曲线等。

The shell of STR 1000 ℃ trolley furnace is made of high-quality cold-rolled steel plate processed by precision CNC machine tool. The bottom of the furnace body is connected with the trolley light rail as a whole. Users do not need any installation and can be used on the flat ground. The furnace lining is made of all fiber structure, using high-quality ceramic fiber blanket as raw material, which can save about 40% energy compared with brick furnace. It is mainly used for normalizing, annealing and quenching of mechanical parts. It is convenient, programmable, PID self-tuning, automatic temperature rise, automatic heat preservation, automatic cooling, no need to be on duty; it can also be equipped with computer communication to operate electric furnace through computer (start furnace, stop electric furnace, pause temperature rise, set temperature rise curve, temperature rise curve storage, historical curve, etc.).

产品特点：

Product features:

双层炉壳，炉体经精致喷塑耐腐蚀耐酸碱，炉体与炉膛隔离采用风冷，壳体表面的温度小于60度

Double layer furnace shell, the furnace body by fine spray plastic corrosion resistance, acid and alkali resistance, furnace body and furnace isolation using air cooling, shell surface temperature is less than 60 degrees

节能：炉膛材料为(炉膛采用纤维制作而成，耐高温、耐急热急冷，保温性能好)

Energy saving: furnace material is (the furnace is made of imported fiber, high temperature resistance, rapid heat and cooling resistance, good heat preservation performance)

升温快(升温速率1℃/h至40℃/min可调)

Fast heating (adjustable heating rate from 1 ℃ / h to 40 ℃ / min)

双回路保护(超温、超压、超流、段偶、断电等)

Double circuit protection (over temperature, over pressure, over current, section couple, power failure, etc.)

静音电子继电器

Silent electronic relay

标准配置数字式PID控制器，可调节升温曲线、保温温度和保温时间

Standard configuration of digital PID controller, adjustable heating curve, holding temperature and holding time

超温报警并断电，漏电保护，操作安全可靠

Over temperature alarm and power off, leakage protection, safe and reliable operation

炉底和炉门一体化，电动进出，易于样品装载

Integration of furnace bottom and furnace door, electric in and out, easy sample loading

1000℃台车炉主要技术参数：

常用型号

注：以上所列出型号都有现货，特殊型号炉膛尺寸可根据客户要求定做，定做周期为7-30个工作日。