产品详情

SGM RTF60140500-11小型回转管式炉为实验室用小型回转式管式烧结炉，炉管旋转过程中粉料能均匀搅拌不堆积，出料的过程中也能一个方向完全自动出料，没有滞留。

可倾斜式旋转管式炉为可用于粉末烧结的高温回转管式炉。炉体中设有耐高温管旋转装置。炉体可实现电机旋转驱动：0-15rpm，电动推杆驱动倾斜角度：0-20°。炉体通过齿轮由电动机带动缓慢旋转。物料由较高的尾端加入，由较低的炉头端卸出。

1100℃可倾斜式旋转管式炉可360度旋转，管壁内有石英挡片帮助粉料翻转有助于烧结的更均匀，专业用于电池正负极材料，无强酸碱性粉体材料，颗粒状物料的实验室煅烧及干燥，用户可根据所要烧制的材料选择在真空下或者气氛保护下进行烧制。连接气路管道的情况下依然可以旋转石英管。

主要特点Main features:

1、The item is suitable for powder materials.Widely used to calcine and dry for battery material, non-strong alkali powder material ,granular material

该旋转管式炉可用于粉末材料，可用于电池正负极材料，无强酸碱性粉体材料，颗粒状物料。

2、310Shigh temp.-resistant S.S. tube put in the middle of furnace, one end sealed by magnetic fluid, the other end uses clamp-joint rotating seal elements, in order to move materials in and out easier, also monitor the pressure inside tube.

310S耐高温不锈钢炉管放置于炉体中间，炉管一端采用磁流体密封，炉管另一端采用卡箍连接旋转密封组件，方便物料出入及管内气压监测。

2、When tube rotating, powder materials can be evenly stirred, not piled up, moreover, when powder discharging, completely auto-discharging in one way, no remains at all.

炉管旋转过程中粉料能均匀搅拌不堆积，出料的过程中也能一个方向完全自动出料，没有滞留。

3、can supply vacuum or gas protection experiment environment.

可在真空下或气氛保护下进行烧制

 

技术参数Technical Parameters：　　

电炉名称	小型回转管式炉
电炉型号	SGM RTF60140500-11
Power 输入电源	Power rated: 28KW (208-240V) 额定功率：28KW (208-240V)
Voltage 电压	Voltage rated:  AC208-240V 50/60HZ 额定电压： AC208-240V 50/60HZ
Working Temperature 工作温度	Max. Temperature: 800℃(310S S.S. tube), 1100℃ (high-purity quartz tube) 设计温度：900℃(310L不锈钢管), 1100℃ (高纯石英管) Continuous working temperature: 850℃ 持续工作温度：850℃ Heating Rate: 10℃/min 升温速率：10℃/分
Temperature Controller 控温方式	PID automatic control and auto-tune function.    模糊PID控制和自整定调节 30 programmable segments for precise thermal processing.    智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple.  超温和断偶报警功能
Length of heating zone 加热区长度	900mm
Length of constant zone 恒温区长度	500mm
Heating Elements 加热元件	Resistance wire, Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金）
Temperature Accuracy 控温精度	+/- 1℃
Dimensions 尺寸	Tube size: S.S.310 Shaped tube, Φ60*400 (two ends) +φ140*500 (middle) mm 炉管尺寸：不锈钢310异形炉管Φ60*400（两端）+φ140*500（中间）mm Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). 两端管堵阻挡管中心产生的热辐射（管堵必须在加热前塞进炉膛）
Inclinable angle 可倾斜角度	30 degree (adjustable) 30度(可调)
Rotate rate 炉管转速	6-50 round/min (adjustable) 6-50转/分(可调)
Net Weight 净重	95kg
Sealing 密封	one end sealed by magnetic fluid,    一端采用磁流体密封 The other end uses clamp-joint rotating seal elements    另一端采用卡箍连接旋转密封
Vacuum Pressure 真空压力	1pa can be achieved by mechanical pump 机械泵可达1pa 10^-4 pa can be reached by molecular pump 分子泵可达10^-4pa Please click the picture below to order vacuum parts
Warranty 质保	One year limited warranty with lifetime support  (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内）
Warning 注意事项	Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

TAG:转动式管式烧结炉 
上一篇:熔喷布模具煅烧炉\熔喷布模具煅烧马弗炉
下一篇:最后一篇